Direct Colors offers tips and recommendations on getting your outdoor concrete, countertops and concrete decor ready for the cold weather season.
You’re listening to LISTEN.DIRECTCOLORS.COM podcast episode 5: Winterizing Outdoor Concrete. In this podcast, Direct Colors offers tips and recommendations on getting your outdoor concrete, countertops and concrete decor ready for the cold weather season. Time to winterize your outdoor concrete! If this is your first time listening, then thanks for listening and welcome to Listen.DirectColors.com!
Many homeowners would like to convert their existing outdoor slabs into sun-rooms and enclosed patios but there are a few things to keep in mind about the concrete once the outdoor becomes indoor living space. Shawna Turner, General Manager at Direct Colors, is here with us today to talk more about patio conversions and what to look out for.
Metallic epoxy finishes are new to Direct Colors. There are so many color and technique possibilities with metallics we wanted to discuss the technical details of the product to help our customers better understand how to use metallic epoxy for their own countertops. Here’s Direct Colors Design Technician, Justin Richardson, to talk about applying Metallic Epoxy Countertop Sealer for indoor countertop projects.
We sat down with Ken Lazenby with Ken’s Custom Designs based in Krebs, OK to talk about how he creates marble effects on concrete countertops. Learn how he makes builds and creates his concrete countertops.
Shawna T: You’re listening to LISTEN.DIRECTCOLORS.COM podcast episode number 25, Take the DIY Decorative Concrete Challenge with Direct Colors! If this is your first time listening, then thanks for listening. I’m Shawna Turner, General Manager with Direct Colors. This week we’d like to talk about getting started with those lingering concrete projects that you’d love to get done but just can’t seem to take the first step. Without question, spring is the time of year when things around the house need to be done before it gets too hot. Don’t let the idea of doing-it-yourself overwhelm you. Our technicians are available by phone at 877-255-2656 or by email at firstname.lastname@example.org to answer questions and help you get started. Until then, here are a few helpful tips for first-timers to DIY decorative concrete:
#1:Start small… You don’t have to remodel the kitchen as your first project. Begin with concrete decor for the garden like statuary or a birdbath to get your feet wet and get accustomed to the products. Experience as we all know is the best teacher. We offer several how-to videos on concrete décor projects that might be useful as a starting point. We also have extensive photo galleries that include a variety projects featuring all our color products. Hopefully our customers will inspire you with their DIY skill and help you select an appropriate project for your own home.
#2:Try some samples… If you are considering a larger project, such as refinishing a countertop, check out our samples and kits page first. We have concrete overlay samples, acid stains and pigments that you can create a sample board with to work on application technique and color selection. If you have a flooring or outdoor concrete project, we offer individual samples and kits to test for concrete reactivity in the case of acid stain or deco gel acid stain and to generally make sure the product is a good fit for your project. Working with samples before beginning with a larger project makes a big difference in your comfort level.
#3: Patios are our #1 project… If you want to try a flooring project, start outside. Patios are the easiest concrete project to complete and are most commonly what our customers cut their teeth on so to speak. We have some awesome step-by-step how to guides that will really boost your confidence about doing DIY projects yourself. Walkways, Driveways and Porches are also good options for first time projects. The products we recommend most frequently is acid stain and for previously colored and sealed concrete, Liquid Colored Antique. Both are great and with good application instructions, easy to do. Once you finish the outdoors, next indoor floors and countertops!
#4: Check out the How-to videos, podcasts and blog posts… Take the time to review the DIY experiences of others before proceeding. Good preparation is never wasted time. DirectColors.com and listen.directcolors.com offers a wealth of information on just about every decorative concrete project. Take advantage of what our customers and experts have put together to help make your DIY efforts go more smoothly.
#5: Free Individual Online and Phone Project Consultations… If you still have lingering questions about the right product to use or anything else, contact the experts at Direct Colors. Believe it or not, they will take the time respond to your email or speak one-on-one with you by phone to work out the details about your project. There’s a free design consultation form online if you prefer or call at 877-255-2656 to speak with a technician M-F, 8:30am-5:00pm CST.
Shawna T: So Take the DIY Decorative Concrete challenge this year and get started on the kinds of projects that will both make your home a better place to be and increase curb appeal!
LISTEN.DIRECTCOLORS.COM DIY Home Improvement podcasts are produced twice monthly for your enjoyment and show notes can be found at LISTEN.DIRECTCOLORS.COM. Feel free to add the podcast to your favorite RSS feed. You can also follow us on Twitter, Facebook, Google+, Pinterest, Youtube and Instagram. All links are in the show notes. I’m Shawna Turner and thanks again for joining us!
Tommy C: You’re listening to LISTEN.DIRECTCOLORS.COM podcast episode number 24. If this is your first time listening, then thanks for coming. I’m Tommy Carter and today we’re talking about acid staining floors during the construction. As acid stained floors have become more popular, homeowners need to know when to acid stain and what to do to protect the finish throughout the construction process. Shawna Turner, General Manager, with Direct Colors is here to give us the scoop on new construction staining projects. Welcome, Shawna.
ST: Thank you very much
Tommy C: What’s the first thing to keep in mind when acid staining floors in a new construction home?
ST: Probably the first thing is to make sure your General Contractor knows and understands that you plan to acid stain the floors. If he or she knows in advance, they can properly direct the ready-mix company pouring and finishing the concrete as well as other building contractors to act accordingly.
Tommy C: What role does the pouring and finishing of the concrete play in successfully acid staining?
ST: If you plan to acid stain concrete, the mix should contain no more than 10% fly ash and should only be lightly machine troweled if at all. The concrete should be rich in cement content and the pores open for the stain to readily absorb and react. As long as the GC knows in advance, these requests should not be difficult or costly to implement.
Tommy C: When should a homeowner plan to acid stain their concrete during construction?
ST: The concrete should be allowed to cure for 30 days for best staining results. If at all possible, the concrete should be stained after the dry wall has been hung but BEFORE it has been mudded in. The reason this is so important is that dry wall mud is a very challenging contaminant to remove from concrete after the fact. Homeowners wishing to acid stain their floors are then forced to spend a lot to time and money cleaning that could have been entirely avoided. Spray insulation is also a problem. Spray insulation should be installed AFTER the floors have been covered with overlapping cardboard. The chemicals interfere with the staining and sealing process and are notoriously difficult to remove.
Tommy C: Just to be clear, could you give us the step by step process from acid staining to waxing?
ST: Sure. That’s a good idea. Once the dry wall has been hung, clean the floors thoroughly using a medium to heavy duty organic degreaser and water solution. All debris, particularly chalk lines, paint, oil stains, dirt and the like, has to be off the surface and out of the pores before you begin. Sanding may be necessary for stubborn debris and staining. When the floors are clean and dry, apply the stain, neutralize and clean according to the instructions. Leave the floor to dry. At this point, you really only want to apply one coat of sealer. I recommend our Sprayable Satin Finish Sealer, especially if you’re working in the winter months. It does have a strong odor during application but can be sprayed on floors freezing and above.
Tommy C: Why just one coat of sealer at this stage?
ST: Even when you cover the floors with overlapping cardboard, damage can still be done during construction. Once the work is complete and the floor cleaned, another coat of sealer can be applied to repair any existing damage and make the floor look brand new again. The sprayable satin finish or AC1315 High Gloss are both solvent-based and have the ability to re-emulsify the acrylic for a smooth final coat.
Tommy C: So what are the final steps after applying the sealer?
ST: After the sealer has been successfully applied, allow the concrete to dry for at least 10 hours before covering with overlapping cardboard. DO NOT TAPE THE CARDBOARD TO THE FLOOR. Tape will bond with the sealer and ruin the finish. Keep the floor covered until construction is complete and the baseboards are ready for placement. At this point, you’re ready to remove the cardboard, clean the floor and apply your final coat of concrete sealer. Allow for 24-48 hours ventilation and dry time before applying the concrete wax and floor polish according to the instructions.
Next step: Enjoy your Floors!
Tommy C: Thank you, Shawna, for that detailed information about acid staining floors during construction. I know it’s a common planning question with our DIY customers. Check out our blog for more on the Care and Maintenance for Acid Stained Floors and other decorative concrete flooring projects.
Tommy C: Listen.directcolors.com includes podcasts on many decorative concrete topics so visit our podcast library for past episodes and check back frequently to see what’s new in the world of DIY decorative concrete! Thank you for listening.
Tommy C: The LISTEN.DIRECTCOLORS.COM podcast is produced twice monthly for your enjoyment and show notes can be found at LISTEN.DIRECTCOLORS.COM. Feel free to add the podcast to your favorite RSS feed. You can also follow us on Twitter, Facebook, Google+ and Instagram. All links are in the show notes. I’m Tommy Carter and thank you for joining us!
We recently had the opportunity to provide product to a local tattoo shop project. Isaac Bruno of Mad Tatter Tattoo Shop is with us today to chat about how he created this epic red and white checkerboard floor created with DCI Concrete Dye!
“My name is Isaac Bruno. I just opened up the Mad Tatter Tattoo Shop in Shawnee, Oklahoma. I was inspired by Alice in Wonderland. I really enjoyed all of the textures, all of the colors and just the imagination of everything: green trees, red trees and talking animals. It’s always intrigued me and I wanted to do something totally different so this is what I did.
We used a lot of different colors of the DCI Concrete Dyes: reds, olives, bright greens that we were working with as well. It turned out really nice. A lot of the colors we tried to use worked out really well and I really enjoyed using them. I used to airbrush t-shirts and cars and things like that, and this product worked similarly to that. It went on really quick and flashed really fast and it was really simple once we figured it out.
We did the red and white here in the lobby with this crazy checkerboard floor, then I ran it down the hallway with a little pink path and grass and weeds going up the walls. I also added a grass pattern to my room and did a little stone walkway around the chair.
I wanted to do something that messed with your mind, to make it as three dimensional as possible. The regular red and white checkerboard floor has been done before. There are a lot of places that have them. I wanted to add a little motion to the room so we made this floor.
Don’t use a masking tape or anything with a high adhesive. We had to use a low tack tape and we couldn’t leave the tape on there for very long.
One thing I had a problem with is I had to keep shaking the product so I went to the store and purchased a whisk, removed the handle and attached it to my drill. I could easily mix the product and continue my project.”